The Drum Pump Is Suitable For Low Viscosity, Aggressive And Non-Flammable Media. Perfectly Suited For The Removal Or Transfer Of Mineral Oils.
-39″ / 1000 Mm (For Emptying Drums)
-47″ / 1200 Mm (For Container Emptying)
-Optionally With Electric Or Compressed Air Drive
-No Lubricants And Therefore No Contamination Of The Pumped Medium By Lubricants
-Optimized Drum Emptying
-Universally Resistant ETFE Shaft Bearings
-Maintenance Without Special Tools
-Seal Modules Of The Seal-Less (SL) Pump Can Be Replaced
-Pump Tube (Material): Alu (Aluminium)
-Impeller (Material): ETFE (Ethylene-Tetrafluorethylene Copolymer)
-Static Seal (Material): No Seals In Contact With The Medium
-Mechanical Seal (Material): No Seals In Contact With The Medium
-Bearing (Material): ETFE
-Drive Shaft (Material): Edelstahl (1.4571)
-Flow Rate (Up To Max. GPM)*: 23, 25
-Delivery Head (Up To Max. Ft)*: 52 , 69
-Temperature Of Medium (Max °F): 212
-Density (Up To Kg/Dm³): 1.4, 2.8
-Operating Pressure (Max. Psi): 87
-Viscosity (Up To Max. Cps)*: Up To 500 Cps (E.G. Hydraulic Oil), 600, 1000
-Type Of Impeller: Radial-Flow Impeller
-Seal Type: Sealless (SL)
-Immersion Length: From 39″ (1000 Mm), From 47″ (1200 Mm)
-Immersion Tube Diameter (Up To Mm): 1.6
-Thread (Inch) Outside: 1 1/4″
-Type Of Drive: Electric, Compressed Air
-Output (W): 640, 1000
-Voltage: 120
-Frequency (Hz): 60
